Skip Navigation

Posts
27
Comments
18
Joined
2 yr. ago

  • Thanks @InnerScientist@lemmy.world & @ark3@lemmy.dbzer0.com

    Actually I don't think it's the firewall, because all the other programs, protocol are working fine. I've tried with chrony too but I get

    No suitable source for synchronisation

    May be because the client is a VM ?

  • Linux @lemmy.ml

    How Forward Text messages (SMS) in 2025 ??

  • Open Source @lemmy.ml

    How Forward Text messages (SMS) in 2025 ??

  • Android @lemmy.world

    How Forward Text messages (SMS) in 2025 ??

  • Linux @lemmy.ml

    regex and awk...

  • Linux @programming.dev

    regex and awk...

  • a more accurate diagram of what I'm targeting..

     
        
    ┌──────┐       ┌───────┐         ┌───┐  
    │Node 1│       │Node 2 │         │DVR│  
    └──┬───┘       └┬──────┘         └─┬─┘  
       │            │                  │    
       │            │                  │    
    vlan10         vlan10             vlan20
       │            │                  │    
       └─────────□  □  □───────────────┘    
                 ┌───────────┐              
                 │hEX refresh│              
                 │E50UG      │ □            
                 └───────────┘              
                     □                      
                     │                      
                     │                      
                     │                      
                  trunking                  
                     │                      
                     │                      
                     │                      
                     □                      
                   ┌───┐  □                 
                   │hEX│  □                 
                   └───┘  □                 
                          □                 
    
    
      

    □ = port

    So it should be possible for Node 1 to reach DVR ? Either trough Firewall or VLAN rules ?

  • Thanks @fraksken@infosec.pub

    with Firewall I get how to do it, but with VLAN ?? I was thinking an access port could be only on VLAN at the time no ?

  • Mikrotik @lemmy.world

    Router, Route traffic in one way ?

  • Programming.dev Meta @programming.dev

    Banned from community, questions.

  • Thanks @testman@lemmy.ml

    StackOverflow says that it can be done by editing xrdp.ini

    This post date from 2013 O_o

     ini
        
    [Xorg]
    name=Xorg
    lib=libxup.so
    username=ask
    password=ask
    ip=127.0.0.1
    port=-1
    code=20
    
    [Xvnc]
    name=Xvnc
    lib=libvnc.so
    username=ask
    password=ask
    ip=127.0.0.1
    port=-1
    
    [vnc-any]
    name=vnc-any
    lib=libvnc.so
    ip=ask
    port=ask5900
    username=na
    password=ask
    
    [neutrinordp-any]
    name=neutrinordp-any
    lib=libxrdpneutrinordp.so
    ip=ask
    port=ask3389
    username=ask
    password=ask
    
      

    so I don't have [xrdp1]

       

    To summarize:

    Edit the xrdp.ini file set port = ask connect from the remote machine, and at login if you have no existing session, specify port -1 to resume a session enter the default of 5910

    I believe this i working if the previous session was already made remotely.. ?otherwise how I get the port of the local X session ?

       

    Is there a specific reason for choosing RDP?\

    rdp is usefull if you have windows client client, but that it's.

       

    And RustDesk is also a good, more advanced alternative.

    great piece of software, but too heavy in my case, I want something simple, that just do one thing good. I don't need

    • End-to-end encryption
    • File transfer
    • Chat features

  • Linux @lemmy.ml

    how keep the same xfce4 session with xrdp ?

  • it works back, it's just super slow.....

  • Programming @programming.dev

    Cannot post image anymore ?

  • Mikrotik @lemmy.world

    authentication and monitor data consumption

  • Thank you very much to all of you for your input !

    I see port in few of your feedback.

    I was not clear enough, let me rephrase:is it possible to give a subnet to a node, not based on the port of the switch/router but based on the node ? meaning that the switch/router need to recognize the node ( MAC or login? ) and then will give him access to A or B

    Thanks.

  • Networking @programming.dev

    LAN: authentication and monitor data consumption

  • networking @sh.itjust.works

    LAN: authentication and monitor data consumption

  • Mikrotik @lemmy.world

    Split simple physical network into two logic network ?

  • Networking @programming.dev

    Network Simulator which one ? (FLOSS)

  • networking @sh.itjust.works

    Network Simulator which one ? (FLOSS)

  • I think I found the cause.

    one of the parent div have is properties perspective and it seem to be the problem... (Firefox 115*)

    So I created an dirty workaround ;)

  • CSS @programming.dev

    background-attachment: fixed still scroll :'(

  • microcontrollers @lemmy.ml

    Where to start with Microcontroller and Python ?

  • Microcontrollers @lemm.ee

    Where to start with Microcontroller and Python ?

  • Android @lemmy.world

    How save a file locally when choosing share on Android ?

  • Thank you all for your input's !! 🤗

    I've put the files on a USB flash drive formatted as a classic FAT. Then I mounted it in the VM (I confirm no need the VMware-tools for that :)

  • Really cool ! (bookmarked*) Just the essential ! to bad there isn't either a difference between versions or a history of the changes