Skip Navigation

Posts
9
Comments
49
Joined
4 mo. ago

  • Thermals are pretty much ok as long as you dont have the cpu at 100% 24/7. I've never had it go over ~50°C in normal use in my basement. Not sure if it can handle gbit on 2 ports but Iperf between two vlans on the same NIC works flawlessly with lots of cpu to spare

    Mine sits at around 11W during normal usage (40mbps into a wireguard tunnel)

  • what about ::1?

  • Recently removed the A record from a few semi-public services that got hammered by AI crawlers, works like a charm

  • I patch as soon as possible and If I were to get pwned id restore a backup and patch again. All my public facing services are sitting in a own, isolated network so an attacker wouldnt get far. If my Hypervisor got compromised id do the same. Id be very fucked if something got into my Proxmox Backup Server tho.

  • ipv4 exhaustion. Devices are meant to have routable addresses. How would that make routing harder?

  • Why shouldnt they if you have enough ips? Nat still is an ugly workaround

  • Deleted

    Permanently Deleted

    Jump
  • the entire website looks like it was extruded by claude

  • Deleted

    Permanently Deleted

    Jump
  • Holy fucking slop

  • Currently running OPNsense on a small Dual-Nic Shuttle PC with an Pentium G4560 and 4 gigs of ram and it's been handling everything I throw at it perfectly fine. Ive got 16 Interfaces, around 10 Wireguard Peers and a SIT tunnel to HE and Im still getting Line Speeds through the firewall.

  • Around 5kWh/day.

    My Biggest Power drain is my homeserver/hypervisor/nas/whatever (5600G, 64gb ram, 9xHDD) which uses around 3.5kWh.Wifi is provided by 2x Extreme Networks WS-AP3825i and 2x Ubiquiti UniFi 6 Plus which total to around 660W/h.My Router is a small dual-nic shuttle pc with a Pentium G4560 drawing like 310W/hSwitching is done by an Aruba 2930F-24G-4SFP+ Switch that consumes 490W/h

    I could probably squeeze out a few more watts if I replace the HDD's with higher density ones and virtualise my router but I really dont feel like doing that right now..

  • thanks!

  • Yes, but I should probably also put one up on my other domains

  • Thank you for creating season appropriate Content!

  • Haven't noticed it yet because my services are on a different network than my clients

  • so want to install radarr? Paste this totally not sketchy bash script into your terminal and execute it as root!!

  • XXI

    Jump
  • that gum you like is going to come back in style!

  • XXI

    Jump
  • Thank you for crea

  • ich_iel @feddit.org

    Ich🤖iel

  • 196 @lemmy.blahaj.zone

    Packet Loss Rule

  • Yea, I host a few (semi-)public services

  • 196 @lemmy.blahaj.zone

    Rule Engine

  • networking @sh.itjust.works

    When Traceroutes Lie: How TTL Jumps Can Give Us a False Impression of the Internet’s Topology

    labs.ripe.net /author/shk/when-traceroutes-lie-how-ttl-jumps-can-give-us-a-false-impression-of-the-internets-topology/
  • 196 @lemmy.blahaj.zone

    Bi-Radial Butt Rule

  • test @lemmy.ml

    Test

  • 196 @lemmy.blahaj.zone

    Dear CaptainRuleExplosion

  • 196 @lemmy.blahaj.zone

    Rule

  • test @lemmy.ml

    Testing Federation