Skip Navigation

User banner

the16bitgamer

@ the16bitgamer @programming.dev

Posts
88
Comments
551
Joined
3 yr. ago

  • Manufacturers want you to say goodbye to small phones once and for all

    Jump

  • For me the iPhone 6s is the perfect size phone.

    If you compare the newer iPhone physical size with the 6s it’s about the same. Which I think is best.

    Now that phones abandoned the idea of a stable aspect ratio screen size has become irrelevant to me. So I look at the phones dimension. And there is still small phones on the market, they just try their best to pretend to be bigger than they are.

    That said I do wish the Mini IPhones lived long enough to get USB C. Was the perfect size for it to be one handed.

  • Heroic v2.21.0 introduces a new console-like fullscreen interface optimized for the Steam Deck and controller navigation

    Jump

  • I like heroic a lot and this was the last big hurdle for me. Fingers crossed when you press home on the steam deck UI the heroic UI disables input too.

  • I know it doesn't look like much, but this is 2 separate prints fused into one

    Jump

  • I think it’s limited in use but if you have a flat and thin stretch on your part, it could work.

  • I know it doesn't look like much, but this is 2 separate prints fused into one

    Jump

  • So the whole process.

    1. Print the first part, the first part has an interfacing slope which is 3d printer friendly. Which results in some stair stepping, but this time this is what we are trying to get.

    2. Remove the first part from the print bed.

    3. Start the second print.

    4. Auto stop the second print after the first layer, and align it with the first print. The first print has a notch which is used to align the 2 parts.

    5. Resume printing. The second print is design to print over air without supports, but with the first print in place it now prints on top of that and fuses the 2 parts together.

    The reason I am doing this is so I can print parts which is larger than my print bed, without using fasteners or adhesive to bond them together. This method basically welds the parts together. This was just a small test print to prove the theory

  • I know it doesn't look like much, but this is 2 separate prints fused into one

    Jump

  • Close

    Yes I am trying to print 2 separate items, this was a test print but the idea would be a print larger than my print bed. I would use this to fuse them together.

    The design isn’t the box but the interface. It’s a long slope which causes stair stepping. But while this is considered a defect I am using it to mate 2 parts. First is a slope which is printer friendly then an adjacent slope which would print in the air but I stop the print after the first layer so it’ll print ontop of the already printed part which I position after the first layer.

    The models are designed in cad since this is going to be apart of a bigger part. Don’t want to share that yet because it’s not designed yet.

    The parts are designed to fuse, that’s the point of this design. Again it’s designed for parts bigger than my print bed.

  • What's up with Ontario and the Fords?

    Jump

  • What's up with Ontario and the Fords?

    Jump

  • I will make things clear. I hate duggy, especially what he did to the Science Center, and I refused to vote for him... ever.

  • What's up with Ontario and the Fords?

    Jump

  • I wasn’t in Ontario so that’s what I am hearing from coworkers and neighbours

  • I know it doesn't look like much, but this is 2 separate prints fused into one

    Jump

  • Of course, who else will I brag to 😛

  • Straight Propaganda

    Jump

  • This mama is ready for some trauma

  • What's up with Ontario and the Fords?

    Jump

  • Because the Liberals who came before him were worse, and to those who keep voting for him, haven’t changed.

    With that said even in the snap election the Conservatives weren’t as popular as duggie is thinking he is. Rural towns flipped Liberal though not enough of them.

    The Ontario Liberal and NDP parties need to get their act together and start cleaning up since the last election the campaign on “we’re better than Dug” when dug was very popular with his hard stance on Trump

  • Handheld devices - Please show and tell what you have!

    Jump

  • I got 4 of them. Miyoo A30, an R36s (clone), Anbernic RG28XX and Anbernic RG35XXH

    The R36s clone is a scam. Good cpu/GPU for the price, but the buttons and speaker is bad. Add to the fact the software sucks you should avoid.

    Miyoo A30, it’s a fine mini console, love the soft touch buttons. Don’t love the lack of RTC (took forever to fix Pokemon Emeralds clock) and the lack of a headphone jack. But when I got it, it was $30 - $40CAD and for that I can’t complain.

    Anbernic RG line of handhelds are all the same. Same performance and same compatibility. The 28 is almost the perfect mini system. Headphone jack, enough buttons for up to PS1/GBA games my only gripe is the loud clicky buttons. Not easy to play in a doctors office.

    35 has the same issues, loud shoulder buttons but it’s bigger build makes it easier to play more. Since it has 2 analog sticks VB and N64 games are open to play, and while it’s jank even DS games are playable. This is the one I recommend.

    My only advice to make these handhelds better.

    1. get custom OS installed. The Stock OS area joke and will not get updates.

    2. get your own roms. Ignoring the fact that what they are doing is piracy, wiping the hardware and putting your own roms in makes your system feel like yours.

    3. find what games you want to play first, Miyoo a30 can’t play PSP but Anbernic can so finding out which emulators your systems needs to run is helpful

  • Framework announced the "Framework 13 Pro" new mainboard will still fit in all existing 13" framework laptops.

    Jump

  • I am excited for the new trackpad. Genuinely want to ditch diving board trackpads forever if this is what it claims to be.

  • I know it doesn't look like much, but this is 2 separate prints fused into one

    Jump

  • Look closely in the middle and you will see a nook. That said the clear TPU is helping hide it

  • I know it doesn't look like much, but this is 2 separate prints fused into one

    Jump

  • No noticeable difference between the TPU printed like it. I am sure if we had infill there would be more

  • I know it doesn't look like much, but this is 2 separate prints fused into one

    Jump

  • CAD, got the parts designed up, then made 2 prints.

    Print 1 is one half while print 2 I only printed the first layer. Aligned the 2 prints, then resumed printing.

    I used magnets to hold the finished part down as to not move.

  • 3DPrinting @lemmy.world
    the16bitgamer @programming.dev

    I know it doesn't look like much, but this is 2 separate prints fused into one

  • Show me your iOS/macOS/watchOS bugs (part 2)

    Jump

  • Have a weird one where some apps like Safari or Voyager where the home bar move the the middle of the screen an just floats there.

    Might be cause my the keyboard but I’m having a hard time getting my phone to do it.

  • Playnix launch their own Steam Machine-like Linux gaming console

    Jump

  • Oh, that looks cute. I wonder how much…

    €1139

    That’s a no for me

  • Just curious, how many Messages do you have in iCloud?

    Jump

  • Same, turned off most iCloud settings since I don’t want their cloud service ads shoved in my face when I eventually run out

  • Steam Hardware @sopuli.xyz
    the16bitgamer @programming.dev

    I just tried RPCS3 for the first time since the big update. LBP is now playable on Deck

  • Programming @programming.dev
    the16bitgamer @programming.dev

    My attempt at locating my iPhone from my Pebble Watch using Bluetooth Latency (It didn't work)

  • 3DPrinting @lemmy.world
    the16bitgamer @programming.dev

    It doesn't look it, but this bag is partially 3D Printed

  • 3DPrinting @lemmy.world
    the16bitgamer @programming.dev

    Perfectly dry filament, as all filament should be

  • Tolkien, Lord of the Rings (LotR), etc. @lemmy.world
    the16bitgamer @programming.dev

    My local Cinema had a 3 day LOTR movie marathon, just finished Return of the King

  • RetroGaming @lemmy.world
    the16bitgamer @programming.dev

    This is my greatest achievement in retro gaming

  • Canada @lemmy.ca
    the16bitgamer @programming.dev

    U.S. Supreme Court finds Trump overstepped authority in imposing tariffs under emergency law

    www.cbc.ca /news/world/livestory/scotus-tariff-ruling-9.7099048
  • Nintendo @lemmy.world
    the16bitgamer @programming.dev

    Got the Virtual Boy switch thingy today. It's fine

  • Linux @programming.dev
    the16bitgamer @programming.dev

    PSA for those using DaVinci Resolve with AMD GPUs, don't install ROCM 7.2, stay on 7.1.1

  • 3DPrinting @lemmy.world
    the16bitgamer @programming.dev

    My Mini lives again!

  • 3DPrinting @lemmy.world
    the16bitgamer @programming.dev

    Well this stinks

  • RetroGaming @lemmy.world
    the16bitgamer @programming.dev

    Didn't realize how hard MGS4's Disc Swap joke hit until I backed it up

  • linuxmemes @lemmy.world
    the16bitgamer @programming.dev

    Why just play on Linux, when you can also play on another Linux

  • Steam Hardware @sopuli.xyz
    the16bitgamer @programming.dev

    Just got my steam deck lcd and need help with wake on bluetooth

  • Linux @programming.dev
    the16bitgamer @programming.dev

    Building the PERFECT Linux PC with Linus Torvalds - LTT

  • 3DPrinting @lemmy.world
    the16bitgamer @programming.dev

    I made a new backplate for my GameCube for my Flippy Drive

  • 3DPrinting @lemmy.world
    the16bitgamer @programming.dev

    I Built a Mini Bowling Lane - Danny Lum

  • Hardware Gore @lemmy.world
    the16bitgamer @programming.dev

    My Anbernic wouldn't turn on, or charge. Opened her up to find this. She's dead Jim.